- > Production line
- > Paint production line
Coating is a kind of material, which can be coated on the surface of the object with different construction processes to form a solid film with firm adhesion, certain strength and continuity.1. Integr
Coating is a kind of material, which can be coated on the surface of the object with different construction processes to form a solid film with firm adhesion, certain strength and continuity.
1. Integrated production line equipment configuration(equipment size, quantity according to the quantity of production):
1)High speed machine
2)Horizontal sand mill cv
4)Paint mixing kettle
5)Fast open bag filter,
6)Paints filling machine
The specific configuration is based on the actual needs
A, the main features:
The equipment can independently complete the dispersing and grinding, refining, cooling, filtering, vacuum suction, semi automatic filling the whole process, greatly reduce the labor intensity, the production time is the traditional equipment consuming 1 / 5, shortening the processing time, and easy cleaning. The utility model can be operated in a vacuum state, with no bubble production, no dust flying, and the quality of products is greatly improved.
The solvent through the liquid metering device is added to the liquid material groove, by vacuum suction to emulsifying kettle, start low speed anchor mixer, the powder material is sucked into the vacuum emulsifying tank for continuous stirred 10 minutes, then turn on the two sets of vertical high shear emulsifying 10 minutes, finally use horizontal emulsion machine, continuous cycle 30 minutes, finished slurry. A high shear inside the tank and an emulsion pump outside the tank are also used,
Ensure further refinement of materials, and greatly shorten the operation time.
By vacuum, resin, film-forming agent from the liquid tank into the low-speed stirred tank, slurry through the bag filter is sucked into the low-speed mixer, the emulsion or solvent, additives, slurry mixing, then adding additives (thickener), blending paint.
After a good tune paint, vacuum defoaming after 5 minutes, stirring was stopped by a bag filter coating to semi-automatic filling machine for packaging. When the coating material using a two bag filters, can be switched with each use, does not affect the filling speed.
1、Production line characteristic
1) JCT mechanical equipment Co., Ltd. is a research, development, design, manufacture, installation, debugging in one of the chemical machinery and equipment manufacturers, Have experience in design and manufacture of paint production equipment more than 15 years.
2）Paint equipment produced by JCT company,Well made,Reasonable structure,Easy to operate,It is suitable for producing all kinds of solvent - based paint and water - based coatings.
1）1-5 tons / day paint production line;
2）5-10 tons /day paint production line;
3）10-20 tons / day paint production line;
4）20-50 tons / day paint production line;
5）It can be designed according to the actual needs.
The hot melt glue stick machine is widely used in resin, adh
Silicone glass glue is widely used in joint sealing of glass
The polychloroprene adhesive has high cohesive strength, hea
It can be widely used in aviation, cable, electronics, elect
JCT Machinery Co.,Ltd has professional technical knowledge and rich experience, specializing in industrial mixing equipment design and manufacture of grafting adhesive, liquid silicone rubber, and silicone sealant complete plant project.
CopyRight © JCT Machinary Co., Ltd. of Foshan, China.
Wufuwei Industrial Zone, Pingzhou, Guicheng Street, Nanhai District, Foshan, Guangdong, China PostCode: 528200
TEL: 0086-0757-86253526 FAX: 0086-757-86707237