Structural characteristics of dry powder mixer machine

1. The dry powder mixer is a horizontal cylinder. The inner and outer two-layer spiral belt has a unique structure, stable operation, reliable quality, low noise, long service life, convenient installation and maintenance, and has a variety of agitator structures for a wide range of applications. Functional mixing equipment.

2. The mixing speed is fast and the mixing uniformity is high, especially for viscosity. A scraper can be installed on the spiral belt, which is more suitable for thick and pasty mixing.

3. Under the mixing requirements of different materials (special materials must be cleaned after each mixing), different spiral belt structures are adopted, and the jacket type can be heated and dried.

Use of dry powder mixer

1. Installation: Place the machine steadily, install the machine feet, and level it so that the machine can run freely.

2. Before use, add oil to the place that needs to be refueled, and then perform no-load operation to check whether the fasteners are loose, whether the electrical appliances are normal, and whether the machinery is operating normally. If there is any abnormality, carry out repair and debugging.

3. Turn the feeding port and open the feeding cover to feed. The feeding amount should not exceed the specified volume. Then close the feeding cover and start the machine for operation. If abnormalities are found on the way, the machine must be shut down for inspection.

4. The inside and outside of the hopper must be rinsed clean after mixing or changing varieties.

JCT Machinery has specialized in powder mixer manufacturing since 2006.We can customize powder mixer professional guidance according to your requirements.If you would like to know more information about the equipment,You can contact me: Phone:+86-13929992673 whatapp:13929992673, Mailbox: jctadaluo@mixmachinery.com, I will answer for you in detail.